RFX Race Series Grip Glue Single (Clear) 1oz / 28.4gr
RFX Race Series Grip Glue Single (Clear) 1oz / 28.4gr
Features
Bonds up to 12 sets of grips.
Dries within 25 seconds.
Designed to secure grip without any damage.
Resealable bottle with applicator included.
Fitting Instructions
Clean and dry all surfaces.
Apply a generous amount of glue to handlebar, barrel of grip and inside flange ends (avoid getting glue into ends of open ended grips).
Install grips IMMEDIATELY and twist half a turn to evenly spread the glue.
Glue dries within 10-25 seconds.
Wipe off any excess glue at flange end.
Wait 5 minutes before use.
Once the glue has dried make sure the throttle turns freely. If there is any resistance due to excess glue - remove with a sharp knife.
RFX Race Series Grip Glue Single (Clear) 1oz / 28.4gr
Features
Bonds up to 12 sets of grips.
Dries within 25 seconds.
Designed to secure grip without any damage.
Resealable bottle with applicator included.
Fitting Instructions
Clean and dry all surfaces.
Apply a generous amount of glue to handlebar, barrel of grip and inside flange ends (avoid getting glue into ends of open ended grips).
Install grips IMMEDIATELY and twist half a turn to evenly spread the glue.
Glue dries within 10-25 seconds.
Wipe off any excess glue at flange end.
Wait 5 minutes before use.
Once the glue has dried make sure the throttle turns freely. If there is any resistance due to excess glue - remove with a sharp knife.
RFX Race Series Grip Glue Single (Clear) 1oz / 28.4gr
Features
Bonds up to 12 sets of grips.
Dries within 25 seconds.
Designed to secure grip without any damage.
Resealable bottle with applicator included.
Fitting Instructions
Clean and dry all surfaces.
Apply a generous amount of glue to handlebar, barrel of grip and inside flange ends (avoid getting glue into ends of open ended grips).
Install grips IMMEDIATELY and twist half a turn to evenly spread the glue.
Glue dries within 10-25 seconds.
Wipe off any excess glue at flange end.
Wait 5 minutes before use.
Once the glue has dried make sure the throttle turns freely. If there is any resistance due to excess glue - remove with a sharp knife.